In this post you will see another advanced technique that is used by\u00a0the experts in 3D printing. This is a big step towards simplifying a number of important quality settings.\u00a0You will discover this technique in Cura 15.04 slicer and at the end you will find a shared link to a Youtube video about this feature in Simplify 3D.\u00a0<\/span><\/p>\n Now fasten your sit belts and get ready for enjoying this interesting, helpful and important feature in Cura.<\/span><\/p>\n <\/p>\n This tool is one of the plugins in Cura. It \u00a0gives you the ability to tweak a number of parameters at the same time, to see their interactions and results. The name of this plugin is “TWEAK At Z 4.0.2<\/strong>“.<\/span><\/p>\n A\u00a0number of 3D Printing parameters including Height, Layers, Printing Speed, Flow Rate, Bed Temperature, Extruder Temperate and Fan Speed could be set and tested.<\/span><\/p>\n You can define multiple tweak steps and add it to the existing tweak list.<\/span><\/p>\n In other words you take more and more control on your 3D printer. <\/span><\/p>\n Isn’t it exciting?<\/span><\/p>\n This picture shows a setting that makes the printer to print at height 5 mm with following settings and continue to the next defined step for example at height 10 mm:<\/span><\/p>\n Printing speed at 80%<\/span><\/p>\n Flow rate at 104%<\/span><\/p>\n Bed Temperature at 60<\/span><\/p>\n Extruder Temperature at 190<\/span><\/p>\n Fan Speed at 150 PWM<\/span><\/p>\n In the next step which starts at height 10 mm the flow rate has decreased to 102% and rest of the parameters are unchanged.<\/span><\/p>\n It continues until the height that you define\u00a0in the next step.<\/span><\/p>\n You are defining step by step for your machine what you expect it to do.\u00a0<\/span><\/p>\n Can you imagine the amount of help that you can get from this single plugin?<\/span><\/p>\n <\/p>\n In previous posts about\u00a0Fine Tuning Temperature Against Stringing<\/a><\/span>\u00a0and\u00a0Setting The Material Flow Rate Of Your 3D Printer<\/a><\/span>\u00a0, you needed to define several steps to test and observe the behaviour of the plastic filament.<\/span><\/p>\n These are two of the most important settings that would provide the best performance of your machine regarding quality of the printed parts, reducing the waste of material and saving printing time, energy and expense.\u00a0\u00a0<\/span><\/p>\n This plugin is the main tool for these vital settings and I am sure you can imagine its importance.<\/span><\/p>\n The intention in this post is not to discuss the details of this plugin. It’s something that we need to go on and tweak to learn by action.<\/span><\/p>\nWhat is this Tool?<\/strong>
![\"\"](\"http:\/\/best-cheap-3dprinters.com\/wp-content\/uploads\/2017\/05\/Multi-Processes-in-Cura-15.04.jpg\")
<\/a><\/h3>\nExample <\/strong><\/h4>\n
<\/a>How this tool helps you<\/strong><\/h3>\n